First up was to foam the car with AG Powermax 3 and worked into all badges, gaps etc with a brush which was then pressure rinsed off then
I cleaned the convertible top with 303 fabric cleaner which was worked in with a brush and rinsed off at a distance with low pressure
Vehicle washed with Megs Hyper Wash and then paint and glass clayed with Sonus SFX then pressure rinsed off before drying with plush drying towels
Wheels removed and cleaned with Epsuma whhel revolution with selection of brushes and mitts, tar deposits were removed wth AS Tardis and then clayed before a coat of Blackfire All metal Sealant was applied. Few blemishes on wheel faces were polished out using Menz 203s and a 4in polishing pad. Tyres dressed with Swissvax Pneu
Wheel arches cleaned with AG Powermax 3, AS Tardis and selection of brushes
Roof was dry by this time so first coat was sprayed on
Paint levels were taken with Posi 200, paint coorection was carried out using Menz 3.02. Few area's on bonnet required 3m FCP to fully remove some micro marring from a DA sander
Paint refined using Megs 205
Few coats of Swissvax Divine applied over 2 days
Rear plastic screen polished with Swissvax Clear Vinyl by DA and then Swissvax Plastic Wax applied. All glass polished with Jeffs Strong
Leather cleaned and protected with LTT products. The plastic Back of seats were covered in water marks which was removed with Swissvax cleaner fluid and then a coat of Swissvax Oynx was applied. All seals treated with Swissvax Seal Feed
Once all this complete wheels recieved another coat of Blackfire metal sealant and tyres treated to another coat of Swissvax Pneu. Exhausts polished with Briliant metal polsihes and sealed with Blackfire metal Sealant. Final wipedown with Swissvax Quick Finish
Few finished shots
Thanks for looking
I cleaned the convertible top with 303 fabric cleaner which was worked in with a brush and rinsed off at a distance with low pressure
Vehicle washed with Megs Hyper Wash and then paint and glass clayed with Sonus SFX then pressure rinsed off before drying with plush drying towels
Wheels removed and cleaned with Epsuma whhel revolution with selection of brushes and mitts, tar deposits were removed wth AS Tardis and then clayed before a coat of Blackfire All metal Sealant was applied. Few blemishes on wheel faces were polished out using Menz 203s and a 4in polishing pad. Tyres dressed with Swissvax Pneu
Wheel arches cleaned with AG Powermax 3, AS Tardis and selection of brushes
Roof was dry by this time so first coat was sprayed on
Paint levels were taken with Posi 200, paint coorection was carried out using Menz 3.02. Few area's on bonnet required 3m FCP to fully remove some micro marring from a DA sander
Paint refined using Megs 205
Few coats of Swissvax Divine applied over 2 days
Rear plastic screen polished with Swissvax Clear Vinyl by DA and then Swissvax Plastic Wax applied. All glass polished with Jeffs Strong
Leather cleaned and protected with LTT products. The plastic Back of seats were covered in water marks which was removed with Swissvax cleaner fluid and then a coat of Swissvax Oynx was applied. All seals treated with Swissvax Seal Feed
Once all this complete wheels recieved another coat of Blackfire metal sealant and tyres treated to another coat of Swissvax Pneu. Exhausts polished with Briliant metal polsihes and sealed with Blackfire metal Sealant. Final wipedown with Swissvax Quick Finish
Few finished shots
Thanks for looking
