Hi Guys
Thanks for taking the time to view another write up from us
This big ole girl required some serious work to get it looking its best again.
Usual wash and decontamination stages were carried out
50/50 shot -left side uncorrected / right side after 2 steps of machine polishing
Few area's had been re-sprayed at some point and the wrong colour was used. Paint should be a solid colour, you can clearly see the metallic in the following photo's below.
Few other "before and after" shots during the correction stages
Once all the compounding and polishing stages were complete I then went around and refined the paintwork with a finishing polish
Customer wanted some long term protection so GTechniq c1 was applied as this offers 3+ years of on-going protection.
Interior was also cleaned... all surfaces cleaned with a weak solution of APC, leather cleaned and sealed with LTT, wood polished with Swissvax Wood Polish and all metal surfaces polished with Swissvax Metal Polish
And the end result...
Thanks for looking
Thanks for taking the time to view another write up from us
This big ole girl required some serious work to get it looking its best again.
Usual wash and decontamination stages were carried out
50/50 shot -left side uncorrected / right side after 2 steps of machine polishing
Few area's had been re-sprayed at some point and the wrong colour was used. Paint should be a solid colour, you can clearly see the metallic in the following photo's below.
Few other "before and after" shots during the correction stages
Once all the compounding and polishing stages were complete I then went around and refined the paintwork with a finishing polish
Customer wanted some long term protection so GTechniq c1 was applied as this offers 3+ years of on-going protection.
Interior was also cleaned... all surfaces cleaned with a weak solution of APC, leather cleaned and sealed with LTT, wood polished with Swissvax Wood Polish and all metal surfaces polished with Swissvax Metal Polish
And the end result...
Thanks for looking