Afternoon. Been a busy couple of weeks so only just getting a few of these pictures and write ups online.
As always.. if you use facebook or twitter why not add us and share our work too..
or 
After being treated to a full frontal Ventureshield protection from AMI (Another excellent installation I might add!), the un protected panels needed a bit of TLC to finish the car off.
Usual wash process took place outside:
Wheels with Autoglym Custom Wheel Cleaner & Autoglym Intensive Tar Remover
Agitated with 1 brush for the wheel face and an EZ Detail Brush for the insides
Engine bay cleaned with Meguairs All Purpose Cleaner and rinsed.
Pre foam with Meguairs Hyper Wash then rinsed after 5 minutes. If you cant fit a foam bottle to your pressure washer then this Foam Gun is very good and works on mains pressure.
2 bucket shampoo with Meguairs Shampoo Plus and a Meguairs MF Wash Mit
Rinsed and dried
Clayed with Sonus Ultra Fine Detailing Clay with Meguairs Last Touch as lube
Stubborn tar removed with Autoglym Intensive Tar Remover
Polishing was done with Menzerna 3.02 (a medium cut polish) on a Meguairs polishing pad and then refined with Menzerna 106FA (a fine cut finishing polish) on a 3m finishing pad
Before
After
Before
After
After
Rear lights Before
Rear lights After
Before
After
The paint was then protected with Blackfire paint sealant. Glass was treated with RainX. Wheels were protected with Blackfire metal sealant as were the exhaust tips (after they were polished)
Interior was vacuumed, leather conditioned with Zaino Z-10 and glass cleaned with Meguairs Glass Cleaner
And some finished shots...
Thanks for looking..
As always.. if you use facebook or twitter why not add us and share our work too..
or After being treated to a full frontal Ventureshield protection from AMI (Another excellent installation I might add!), the un protected panels needed a bit of TLC to finish the car off.
Usual wash process took place outside:
Wheels with Autoglym Custom Wheel Cleaner & Autoglym Intensive Tar Remover
Agitated with 1 brush for the wheel face and an EZ Detail Brush for the insides
Engine bay cleaned with Meguairs All Purpose Cleaner and rinsed.
Pre foam with Meguairs Hyper Wash then rinsed after 5 minutes. If you cant fit a foam bottle to your pressure washer then this Foam Gun is very good and works on mains pressure.
2 bucket shampoo with Meguairs Shampoo Plus and a Meguairs MF Wash Mit
Rinsed and dried
Clayed with Sonus Ultra Fine Detailing Clay with Meguairs Last Touch as lube
Stubborn tar removed with Autoglym Intensive Tar Remover
Polishing was done with Menzerna 3.02 (a medium cut polish) on a Meguairs polishing pad and then refined with Menzerna 106FA (a fine cut finishing polish) on a 3m finishing pad
Before
After
Before
After
After
Rear lights Before
Rear lights After
Before
After
The paint was then protected with Blackfire paint sealant. Glass was treated with RainX. Wheels were protected with Blackfire metal sealant as were the exhaust tips (after they were polished)
Interior was vacuumed, leather conditioned with Zaino Z-10 and glass cleaned with Meguairs Glass Cleaner
And some finished shots...
Thanks for looking..
