1989 Porsche 911 Turbo detailed

Jayplay

Newbie
This a good example of what just a light machine polish can do without having full paint correction carried out. Owner wanted full paint correction but with the low paint levels such work couldnt be carried out so it was booked in for a Enhancement Detail

This had just came back from the bodyshop not too long and as you can see they left a bit of mess

P1070370.jpg


P1070371.jpg


P1070372.jpg


P1070373.jpg


P1070374.jpg


Overspray on glass
P1070493.jpg


P1070495.jpg


AFTER
P1070496.jpg


With paint levels extremely low throughout the vehicle so only a finishing polish was used on everything apart from the bonnet. This did a good job of clearing up the light swirling but left behind a lot of defects but I wasnt willing to go any further due to the paint levels

As bonnet had more paint to play with I used Menz 203s on a finishing pad
P1070393.jpg


P1070400.jpg


P1070394.jpg


Much better, notice the bad pitting, this was only found on the bonnet
P1070444.jpg


P1070438.jpg


P1070428.jpg


P1070429.jpg


P1070415.jpg


P1070416.jpg


P1070425.jpg


P1070426.jpg


SV cleaner fluid was applied by hand and 2 coats of Sv Divine was applied. CG New Look trim gel was used on all trim and leather recieved 3 coats of Leather milk as was very dry

Some afters
P1070453.jpg


P1070451.jpg


P1070476.jpg


P1070487.jpg


P1070500.jpg


P1070511.jpg


P1070540.jpg


P1070524.jpg


P1070499.jpg


P1070490.jpg


P1070491.jpg


P1070503.jpg


P1070537.jpg


P1070578.jpg


P1070523.jpg


P1070561.jpg


P1070497.jpg


P1070507.jpg


P1070502.jpg


Short Vid
http://www.youtube.com/watch?v=c9EXgfrOccw

thanks for looking
 
Last edited:
Back
Top